Recommended Printer Conditions


Item Setting
Nozzle temperature* 200°C
Heat Bed Temperature No heat needed
Speed** 90-150 mm/s
In fill As needed, up to 100%
Layer Height Up to 0.2 mm
Cooling Fan On

* Nozzle temperature recommendations based on achieving better print definition . The recommendations given above leave about ±5°C to account for any fluctuations in temperature by the printer.

**Higher print speeds might require higher nozzle temperatures

These processing conditions are general guidelines only. Each printer will likely have a unique set of printing parameters.

Key Benefits: Improved impact strength. Significantly less brittle than generic PLA filament. All PLA++ filaments are FDA compliant.